je.st
news
Tag: thin film
Thin Film Resistors offer ratio tolerances to 0.05%.
2015-05-04 14:31:05| Industrial Newsroom - All News for Today
Constructed with tantalum nitride resistor film on high-purity alumina or ceramic substrate, AORN Series features low TCR tracking of ±5 ppm/°C and long-term ratio stability of 0.015% after 1,000 hr at +155°C. AEC-Q200-qualified, dual in-line devices are available as 4 equal-value resistors ranging from 1–100 kΩ and as 2 resistor dividers in same package with ratios from 1:1 to 1:100. Housed in 8-pin SOIC package, units offer 100 mW per resistor element and are rated for ESD to 2 kV at >10 kΩ.
Thin Film Bar MOS Capacitor operates up to 100 V.
2015-04-29 14:31:08| Industrial Newsroom - All News for Today
Available in 120 x 35 mil Case A or 240 x 35 mil Case B, Model BRCP is designed for high-power hybrid assemblies and SiC and GaN applications. Unit offers capacitance range of 5–100 pF, low TCC down to ±50 ppm/°C, and absolute tolerance down to ±5%. Operating from -55 to +150°C, capacitor is optimized for LC, RC, or LRC filters; RF choking; and DC blocking and impedance matching. For these applications, BRCP can accommodate 7 bonds for Case A and 15 bonds for Case B.
Custom Thin Film Substrate support sidewall patterning.
2015-03-04 14:31:09| Industrial Newsroom - All News for Today
Increasing design flexibility and density for equipment miniaturization, SDWP substrates accommodate die attach or wire bonding on side walls as well as top side. This lets designers provide continuity between top and bottom of die, connect wire bonds to traces on side of die, or make contact with side of die with pin. SDWP substrates feature plate thickness of ≤0.025 in., min line width and gap of ≥0.003 in., and tight line width and gap tolerances down to ±0.001 in.
Tags: support
film
custom
thin
Thin Film Chip Resistors offer long-term stability.
2015-02-19 14:30:17| Industrial Newsroom - All News for Today
Featuring special passivation method, TNPW/TNPU Series offers optimal moisture resistivity, tested according to 85°C/85% biased humidity test. TNPW is suitable for precision down to 0.1% 10 ppm and supplied in 0402 to 1210 sizes, while TNPU offers tighter precision down to 0.02% 5 ppm, with 3 package sizes of 0603, 0805, and 1206. AEC-Q200 qualified and sulfur impervious, resistors are suited for applications such as imaging, battery management, DC/DC converters, and ultrasound probes.
Tags: offer
film
thin
stability
Vishay Intertechnology Enhances E/H Series MIL-PRF-55342-Qualified Thin Film Resistors With 'T' Level Failure Rate
2015-02-10 07:53:04| rfglobalnet Home Page
Vishay Intertechnology, Inc. recently announced that it has enhanced its E/H series of precision MIL-PRF-55342-qualified thin film surface-mount resistor chips to offer a “T” level failure rate for critical space applications.
Sites : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] next »